LATEST ARTICLES

Talent and gender diversity in the rail sector

Guest writer Adam Razzell, head of transport and infrastructure at Advance Resource Managers, reflects on the diversity of talent in the rail industry and questions whether more needs to be done.


With an average staff turnover rate of just three percent (compared with the UK median rate of 13.6 percent), the UK’s rail sector has less experience than most of dealing with skills gaps – but its landscape is changing quickly.

An ideal time for reflection

Due to retirement alone, the industry is expected to lose as many as 50,000 workers by 2033 (from a total of around 240,000), most from operative roles. The futures of a further 15 percent – the workforce’s EU nationals – also remain uncertain because of Brexit.

Then there’s rising demand from passengers (in contrast with falling interest in bus and coach travel) and plans for a new era of high-speed rail infrastructure to create the need for even more staff.

As UK rail looks to steady itself for the future using a range of recruitment and training initiatives, we find ourselves at an ideal point to take stock of its current talent, and the diversity of that talent. Does its recruitment approach need to change drastically for a more secure future, or is it on the right track already?

A general snapshot of rail talent

According to Department for Transport data from December 2019, around 240,000 people work in the UK rail sector – 67.8 percent for rail infrastructure firms and 25.4 percent for train operators, the two biggest categories.

With salaries ranging from £16,000 up to £71,000, the average rail worker earns just over £35,500 per year, although this rises to £39,000 in London and falls just short of £32,000 in Scotland. Average salaries in all other areas of the UK sit between these two figures, meaning all are above the wider national median salary of £30,300.

Given rail’s low staff turnover rate, it’s unsurprising that almost two-thirds (63 per cent) of its workers have eight or more years of experience in their roles. Sixteen percent have between four and seven years of experience, and 20 percent have three years or less. And, while this implies that a retirement surge could cause serious issues, the amount of experience currently present in the sector does bode well for the Strategic Transport Apprenticeship Taskforce (STAT), a body set up in 2016 to address skills gaps and increase diversity across UK transport using apprenticeship programmes.

Gender representation in rail

The rail sector cannot avoid major skills shortage without diversifying its workforce – that’s something that Mike Brown, the recently departed Transport for London Commissioner and STAT chair, implied in STAT’s latest update report.

“A skilled workforce is vital to future economic success,” he said. “Quality training at all levels is fundamental and we need to broaden our talent pipeline if we are to drive productivity and innovation across the transport sector.”

Right now, the data shows a huge imbalance. Of its quarter-million employees (including those working in passenger services, freight operations and the wider supply chain), only 17 per cent are female. That falls to 13 per cent in the commercial rail workforce, and again to 12 per cent in signalling and design – both areas with significantly higher average salaries (£45,800 and £37,900 respectively).

%%tb-image-alt-text%%
Both photo credits: Southeastern.

Some companies and regions are more diverse than others. Network Rail – by far the sector’s biggest employer – TFL and Southern Railway hold the most female talent, while London and the South East lead the list of regions. But more needs to be done.

What’s positive is that we are seeing action from some of the sector’s biggest operators. Southeastern and East Midlands Trains, for example, recently introduced anonymous candidate screening and targeted advertising campaigns in attempts to encourage more women to become train drivers. Southeastern is aiming for 40 percent of applicants for driver roles to be women by 2021 (from 4.5 percent in 2019), and East Midlands has already seen the number of female applicants double.

But skills gaps and underrepresentation aren’t challenges that employers can address individually – there needs to be an industry-wide shift. And, as the seemingly inevitable skills gap inches closer, it must happen quickly.

HS2 moves 1,100-tonne viaduct in weekend operation

HS2 has released timelapse and drone footage showing contractors moving a 1,100 tonne composite viaduct into place over two M42/M6 link roads in North Warwickshire.

The 158-metre-long structure was moved into place in 13 hours using a specialist push-pull jacking technique.

The ‘East M42-M6 Link Viaduct’ is one of 13 viaducts which make up HS2’s triangular Delta Junction. This section of the railway enables high speed trains to travel between London, Interchange Station in Solihull and Birmingham Curzon Street Station.

The operation was completed 10 hours ahead of schedule during a weekend road closure, enabling the motorway link roads to be opened earlier than planned.

It was delivered by a team of 25 people from specialist steelwork company Victor Buyck Steel Construction (VBSC), working on behalf of HS2’s main works contractor Balfour Beatty VINCI (BBV).

HS2 Ltd, BBV and National Highways collaborated to minimise disruption for people using the roads and enabling this engineering feat to take place.

This was the second ‘launch’ of this structure to move it into its final position over both westbound and eastbound motorway link roads. In February, the first launch took the first 84 metre section of the viaduct to its halfway position over the westbound link road.

Since then, three further steel girders were welded to the back of the first section and 38 precast concrete slabs were installed to complete the 158-metre-long structure. By installing the slabs prior to launch, the number of highway closures required to finish the composite deck has been significantly reduced helping to keep future closures of the link road to a minimum.

Over the summer, a similar two-stage operation will move the identical ‘West M42-M6 Link Viaduct’ which runs parallel to the East Link Viaduct.

Image credit: HS2

North West rail improvements planned this early May bank holiday

Passengers travelling on the West Coast main line and North West rail routes are being advised to check before they travel ahead of important railway upgrades over the early May bank holiday.

Network Rail is carrying out major projects between Saturday 4 and Monday 6 May to improve the region’s railway for passengers and freight.

The work includes:

  • Track and drainage upgrades in Crewe.
  • Essential maintenance between Runcorn and Warrington.
  • Important drainage improvements between Wigan and Liverpool.
  • Continuing to electrify the line between Wigan and Bolton.
  • Track maintenance and signalling work in Carlisle.

For the work to take place, there will be changes to rail services. Some trains will use diversionary routes, some will not run at all. Rail replacement buses will be in operation.

Passengers are being advised to plan their journey on www.nationalrail.co.uk.

Phil James, Network Rail’s North West route director, said: “We made great progress on major railway improvements over Easter and I’d like to thank passengers for their continued patience while we carry out more must-do work between Saturday 4 and Monday 6 May. We know there is never an ideal time to shut the railway, but bank holidays continue to be the least disruptive time for us to carry out this essential maintenance.

“With sections of railway needing to close for our important work, please check National Rail Enquiries in advance to see how your journey could be impacted.”

In the South of the West Coast Main Line, the railway will be closed between Euston and Milton Keynes on Sunday 5 May, as engineers upgrade the track. Passengers travelling to or from Euston on Sunday 5 May are advised to travel via Kings Cross and get a bus replacement service to or from Milton Keynes. Trains will start and terminate at Milton Keynes Central, where there will be rail replacement services to and from Bedford.  

Passengers are advised to plan ahead through their train operator or by visiting the www.nationalrail.co.uk website.

Image credit: Network Rail

Sekisui’s FFU: Newark flat crossing four years on

Sekisui manufactures synthetic wood baulks made from Fibre-reinforced Foamed Urethane (FFU). Network Rail engineers installed the first FFU baulks and sleepers as replacements for traditional hardwood on military canal bridges in Kent during 2014. The FFU product was first introduced on Japanese Railways in 1980 and early installations are still performing to specification. FFU is now widely used on railway infrastructure in 33 countries to support track on bridges, decking for level crossings, plain line sleepers, and switch and crossing (S&C) bearers.

Newark flat crossing is an example of a unique and large application of FFU technology on Network Rail infrastructure which required the development of the long FFU synthetic bearers forming a lattice track support 16 by 16 metres. Sekisui holds full Network Rail Product Acceptance Certification PA05/07176 for this project which became operational following complete track renewal in August 2019. The FFU was used to replace the traditional hardwood to support the track.

Fabricated to requirement

The FFU baulks can be fabricated and milled to meet site specific geometry requirements including providing holes, notches, pockets, and variable cross level to individual design requirements. Key benefits over hardwood include longevity with over 50 years’ service life. FFU is form retentive, not prone to splitting or absorption of water, and does not rot or deteriorate in sunlight so it contributes significantly to ‘whole life cycle cost reduction’ by reducing track maintenance and renewal interventions. The product does not require maintenance inspectors to complete micro-drilling during service life and is fully recyclable.

16-metre-long special prepared FFU baulks. Credit: Sekisui.

Situated just north of Newark Northgate station, the flat crossing is located where the east-west Nottingham – Lincoln line crosses the East Coast Main Line (ECML). It is one of the most complex track structures on the route, with no fewer than 16 crossing noses, and carries 160km/h inter-city trains running north-south and heavy freight traffic on the east-west line.

Prior to the 2019 renewal, the supporting lattice that holds the cast crossings into position was made up from hardwood and typically required replacement every 15 years. The last renewal occurred in 2003. Network Rail found that procuring suitable hardwood timbers of 16 metres for a further renewal proved problematic. This led to the decision to adopt alternative technology which ultimately led to lower whole life costs by reducing track maintenance requirements and track renewal interval.

Thanks to close co-ordination between the various partners, the installation weekend went to plan. After the end of services on 25 August 2019, the old trackwork was removed and the supporting ballast replaced, including the installation of geocells to strengthen the formation.

Whilst FFU has been used in various countries, this project is the first time that something on this scale has been fabricated outside Japan. The new bearers are expected to more than double the life of the lattice layout and reduce maintenance intervals, significantly contributing to a favourable business case. Network Rail engineers are considering how FFU could be utilised in other applications, including plain line sleepers, S&C bearers, and level crossings. Installation of FFU for waybeam bridges has full product approval.
Newark flat crossing

For the Newark flat crossing renewal Sekisui offered to provide 16-metre one-piece beams, matching the existing wooden bearer layout. The FFU baulk material was manufactured in Japan to a maximum length of 8 metres. To produce the required 16-metre bearers, Sekisui partnered with Progress Rail to assemble the beams at a facility near Nottingham. This was the first time that this has been done outside Japan. From Spring 2024, FFU will also be manufactured in a new factory in the Netherlands.

The bearers were constructed from 30mm thick, 8-metres-long layers of FFU; these were manufactured in Japan and shipped to the UK for final assembly. Two densities of FFU – 740 and 1,000 kg/m3 (FFU 74 & FFU 100) – were combined in laminated form to give an increased compressive strength near the surface. Specialists from Sekisui worked with staff from Progress Rail to assemble the bearers. These were combined with the other railway elements including the rails and Cast Manganese Crossings manufactured by Progress Rail to complete the huge crossing lattice assembly, weighing more than 40 tonnes. The design was complex, with the interlocking components designed to ensure that the construction matched the specification.

End cross baulks fixing two long bearers. Credit: Sekisui.

After eight weeks, the novel FFU bearers were finished, numbered, painted, and assembled into the lattice form in the factory to confirm fit. The crossings were then attached by Progress Rail, drilling into the new material which behaves like hardwood. The trackwork was renewed using CEN56 HP rails instead of the previous 56 kg/m BS113A rails, along with new cast steel crossing inserts. Once everything had been fitted accurately each component was marked and the crossing partially dismantled for transport to site. The various components were taken to Newark by rail at the end of July 2019 and reassembled on a site adjacent to the line ready for installation.

Maintenance comparison after four years

Over four years after the renewal of Newark Flat Crossing utilising FFU, Network Rail Track Maintenance Engineers (TME) in Doncaster report significant reduction in maintenance requirements.

The TMEs gave feedback comparing the same time-period after the 2003 renewal:

2003-2007 hardwood timber renewal – track geometry deterioration, ride quality issues, splitting of timbers, failure of screws, several rail management interventions to cast crossings, including cracking of castings leading to early replacement of ironwork.

2019-2023 FFU renewal – stable track geometry with no ride quality issues reported, no screw failures, no deterioration in the FFU material, reduced rail management intervention and no cracking or premature replacement of cast crossings.

In terms of rail management, since the introduction of FFU, Network Rail’s TMEs have reduced the cyclical inspection and maintenance requirements from four-weekly to eight-weekly. There is now only minimal crossing nose profile grinding required and two small casting weld repairs have been done to date.

Sebastian Smith, route engineer (track) East Coast Route, York, commented that his team viewed the project as “a success, with the FFU seeming to offer a fit and forget characteristic which is very beneficial to a maintainer”. He is delighted with the project, stating: “the decision to install based on whole life cost is proving to be correct”.

Lifting the crossing into its final track position. Credit: Sekisui.

Sebastian is looking forward to introducing FFU into Switch and Crossing layouts in the next Control Period, as well as a continued Waybeam Bridge renewal programme on the East Coast Route.

Many thanks to Simon Hunt, track maintenance engineer, Doncaster and Sebastian Smith, route engineer (track) East Coast Route, York for their input to this article.

FFU: a background

Developed in conjunction with Japanese National Railways, FFU synthetic sleepers are made using the pultrusion process. Continuous glass fibres are soaked and mixed with polyurethane, and then hardened at a raised temperature, moulded, pulled, and cut to length. This creates a high-quality material that has the life expectancy of plastic and the weight of natural wood. It can also be worked like natural wood.

First installed in Japan in 1980, and adopted for standard sleepers since 1985, FFU has subsequently been installed on several projects in Europe over the past 20 years, particularly turnouts and bridges. FFU sleepers are currently used on more than 1,950km of track around the world.

Tests of the original 1980 FFU sleepers, undertaken by the Railway Technical Research Institute in 2011, predicted that the sleepers could safely continue in use for another 20 years, giving a total life of around 50 years. FFU sleepers have also been certified by Germany’s Federal Railway Office for use on tracks operating at up to 230km/h and 22.5 tonnes axle load.

Lead image credit: Sekisui


c2c issues record-breaking £10,000 fine to persistent fare evader

Train operator c2c Trenitalia says its work to crackdown on fare evasion and ticketing fraud has led to one customer recently paying back £10,000.

The customer, recently travelling through one of c2c’s London stations, was asked to present their rail ticket to a revenue protection officer as part of a routine inspection. The customer in question did not have a valid ticket for the full length of the journey they had just made, and on further investigation it was found that the customer had been making this same trip and cheating the system for nearly five years.

C2c has announced that its ongoing work to crackdown on fare evasion across the route continues to be a great success – with approximately £130,000 received in fines and penalty payments so far this year.

Iain Palmer, c2c’s head of revenue protection & security, said: “Fare evasion, whether deliberately or inadvertently, is a criminal offence and c2c will always look to prosecute those who attempt to cheat the system.

“We have recently increased the number of Revenue Protection officers patrolling our stations and trains, especially during the off-peak, and we now have more eyes and ears monitoring and closing in on customers who frequently travel without a valid ticket.”

Fare evasion costs the rail industry millions of pounds every single year and is also a key contributor to anti-social behaviour across the rail network.

Operating in partnership with the British Transport Police, c2c’s revenue protection and security teams are out on the route, seven days a week – from first trains until last – working to catch and apprehend those who do not have a valid ticket for their journey. During 2023, the work of these teams led to over £315k being received in penalty fares and fines.

Iain continued: “Our work to crackdown on fare evasion isn’t just about catching and issuing penalty fares to customers who travel without a ticket, the intelligence provided by our digital sales channels and ticket barriers also help us identify those using c2c services without a valid ticket for the entirety of their journey.”

He added: “There is absolutely no excuse for travelling on c2c without a ticket!”

Image credit: c2c

Metrolink sets personal best for passenger journeys

As thousands of runners took to the streets for the Manchester Marathon earlier this month, Metrolink was able to record a new personal best for passengers served on a single day.

On 14 April passengers made 175,000 journeys, the highest ever recorded on a single Sunday in Metrolink’s 30-year history. It was also the busiest Sunday ever recorded, and the eighth busiest day on the network since it opened in 1992.

This year’s milestone was also 20% higher than the second highest number of journeys ever recorded on a Sunday – 145,000 – which was also hit during the Manchester Marathon in 2023.

Similarly to the last year’s race the network was busiest in the morning ahead of the start of the event, and in the early afternoon once the race was run. The Altrincham, Bury, East Didsbury, and Manchester Airport lines were among the busiest on the day.

Ahead of the marathon Transport for Greater Manchester (TfGM) issued travel advice for runners, spectators and residents travelling into the regional centre, with many roads closed and bus services diverted, while also putting in place robust plans to provide capacity on Metrolink.

Danny Vaughan, TfGM’s head of Metrolink, said: “As always we are delighted to support the Marathon, which is one of the highlights of our events calendar here in Greater Manchester.

“To have smashed our record for the number of passenger journeys made on a Sunday for a second year in a row, and with it being during the Marathon again, is truly special. I think this shows just how important Metrolink is for people living in our region, but also those visiting too.

“I want to thank everyone who chose to travel on Metrolink on race day, as well as the race organisers and partners who helped deliver another fantastic event.

“But I also want to say a huge thanks to our staff behind the scenes and on the frontline, and in particular the two Metrolink employees who looked after a runner who was taken ill onboard a tram on the day and helped him get home safely.”

Image: TfGM

John Whitehurst appointed GTR’s chief operating officer

Govia Thameslink Railway (GTR) has announced the appointment of John Whitehurst as its chief operating officer (COO). He will begin the role on Monday 20 May.

The role will see John lead the planning and delivery of services across GTR’s four brands – Gatwick Express, Great Northern, Southern, and Thameslink – which collectively represent approximately 18% of UK rail passenger journeys. He will also hold key relations with the supply chain and industry partners such as Network Rail.

John will bring to GTR significant experience within transport, having managed large teams and multi-million-pound projects across operations, infrastructure and engineering. He has previously worked at Network Rail as route infrastructure maintenance director on the Kent and Anglia routes, and spent nearly 12 years at Serco, where he was managing director of transport and community services.

John said: “I’ve been an admirer and customer of GTR for many years, so I’m very proud to join and be a part of the UK’s biggest railway operator at an exciting and important time for the rail industry. I’m looking forward to getting out across the length and breadth of GTR’s vast network, meeting my new colleagues who work incredibly hard every day to provide customers with a safe and reliable service. I’m excited to work with all our industry partners and stakeholders to innovate and improve our services for the hundreds of thousands of customers who rely on us.”

Andy Coulthurst, who has led GTR’s operations successfully on an interim basis since November 2023, will retire this summer after more than 20 years in the rail industry. Andy joined GTR in January 2020, assuming various roles including leading a successful programme of initiatives to give customers an ever better and more reliable train service. Andy will stay with GTR to help ensure a smooth and seamless leadership transition up to his retirement in the summer.

Angie Doll, GTR’s chief executive officer, said: “I am delighted to welcome John to GTR. His impressive career both inside and outside rail will be a great addition to my team and the wider organisation. I know that John’s extensive knowledge of running operations in the UK and abroad will play a key role in our future success, bringing fresh thinking as well as years of experience to help GTR grow and deliver for our customers and communities. I very much look forward to having John in my team.

“I would also like to express my heartfelt thanks to Andy, who has been an excellent interim chief operating officer. Andy joined us during a challenging period in 2020, and throughout his time at GTR has consistently demonstrated strong leadership. He will be missed, and on behalf of everyone at GTR I wish him a happy and well-deserved retirement.”

Image credit: GTR

GWR and Network Rail Director Ruth Busby receives OBE


Inspirational Great Western Railway (GWR) and Network Rail director Ruth Busby was at Buckingham Palace on Friday to receive her OBE from the Princess Royal.

Ruth was recognised in the New Year Honours ‘for services to diversity in the rail industry’.

Her award recognises not only her work within GWR and Network Rail, but the numerous other organisations she represents to champion Equality, Diversity and Inclusion (EDI) in the rail industry.

Ruth, from Didcot, said: “It was an absolutely thrill to receive my OBE from the Princess Royal and it was lovely to be joined at Buckingham Palace by my husband, Liam, and children, Megan and Alfie.

“I still feel so humbled that people took the time to nominate me and the memories from Friday’s ceremony will last a lifetime.”

Ruth joined GWR in 2018 and, after helping to lead colleagues through the Covid-19 pandemic, was named HR Director of the Year at the 2021 Personnel Today Awards.

Last year she began a joint strategic role with responsibility for the HR and Internal Communications teams in both GWR and Network Rail’s Wales and Western Region.

Over the past few years, she has also worked with the Department for Transport, the Samaritans, and Mental Health at Work, to lead a research study on mental health and wellbeing across the rail industry.

She is also the executive sponsor for Rail Wellbeing Live, the biggest health and wellbeing movement in the history of the rail industry.

As a non-executive director of the Youth Futures Foundation, Ruth also works to improve employment outcomes for young people from marginalised backgrounds and is currently chair of its People and Culture Committee and Employer Advisory Board.

Ruth also remains a passionate supporter of Women in Rail, having previously served as co-chair of Women in Rail South.

Image credit: GWR

New trains on the Ebbw Vale line

Brand new trains have been launched on the Ebbw Vale line offering customers a more comfortable and reliable experience.

Built in Newport, the Class 197 trains have started to enter service on mainline routes around Wales and the Borders.

They will run between Ebbw Vale and Cardiff Central, as well as Newport, following the introduction of brand-new services on the line earlier this year.

The Cabinet Secretary for North Wales and Transport, Ken Skates said: “This is great news. These trains are modern and comfortable and provide a much-improved experience for passengers. This is another positive step for rail services in Wales.”

The trains are part of an £800 million investment in new trains to transform rail travel that is currently being delivered by Transport for Wales, replacing trains that were between 30 and 40 years old.

Marie Daly, chief customer and culture officer at Transport for Wales said: “Earlier this year we were able to launch brand new services to Newport from Ebbw Vale thanks to a £70 million public investment in the stations, track and signalling, and these new trains are the next important step to help boost the economy and to encourage people to make more sustainable journeys.

“I’m delighted that our Ebbw Vale customers will be benefiting from our brand-new trains. The trains are comfortable, and offer greater capacity for our customers.”

Assembled at the CAF train factory in Llanwern, Newport, there will be 77 of the class 197 trains operating throughout Wales and along its border routes, forming the backbone of the mainline fleet.

The trains will be able to run up to a maximum of four carriages on the Ebbw Vale line.

January marked the introduction of the new Newport services, almost doubling the number of trains operating on the line with two trains running per hour, one to/from Cardiff and one to/from Newport.

While the transition is ongoing, customers may still see some of the older trains in operation however these will gradually be phased out over the coming years.

The Class 197s will start operating down to Pembroke Dock later this year and on the Cambrian line in 2025.

Image credit: TfW

Northern releases annual fare dodging statistics

Northern says 97% of its passengers are ‘with us’ when it comes to tackling the issue of fare dodgers on its network as it released the annual figures from its Debt Recovery and Prosecutions Unit.

The train operator says ticketless travel accounted for as little as 3% of journeys on its network during the last twelve months (1 Apr 2023 to 31 March 2024) – the lowest on record.

However, during the same period, Northern still had to investigate 57,302 reports of attempted fare evasion, issue 41,922 Penalty Fare Notices, and attend 172 court sittings – activity which ultimately helped recover £3.97 million of lost revenue for the taxpayer.

Mark Powles, commercial and customer director, said: “The reality is that fare dodgers expect the taxpayer to pick up the tab for their journey – and that’s just not on.

“The rail industry receives a great deal of public subsidy and we have a responsibility to do everything we can to reduce that figure – starting by ensuring everyone pays their way.

“Clearly, with almost 97% of people boarding our trains doing the right thing and buying a ticket for their journey, they are with us on this issue.”

In January, Northern reported a 20% drop in the number of penalty fares issued in the first year since the government increased the fine for those travelling without a ticket to £100. That 20% reduction is maintained into a second year with the figures released today.

Ticket checks carried out by conductors on-board its trains and the growing use of physical ticket gatelines at major stations have reassured customers that Northern takes fare evasion seriously.

Commenting on the wider benefits of tackling fare evasion, Mark added: “In cases of persistent fare evasion, there is often an element of anti-social behaviour to deal with too.

“By tackling the root cause and keeping those responsible for that behaviour off our trains we can create a safer environment for our customers.”

Image credit: Northern

PB Design announces new managing director and senior leadership team

PB Design, a leading provider of industrial standby power solutions, has announced key changes to its senior leadership team.

Effective 1 April, Scott Edsall, the company’s former strategy & technical director, has taken on the role of Managing Director. With nearly seven years of experience at PB Design, Edsall has been instrumental in shaping the company’s future strategy, particularly in developing its new modular industrial product line and innovative EV Charging solutions. In his new role, Edsall will lead the team in expanding PB Design’s focus on net zero technologies, addressing pressing global climate challenges.

Mark Crocker, who successfully led PB Design through employee ownership for a decade, stepped down from his position as managing director on 1 April to enjoy an early retirement. Crocker will remain with the business in a Board-level role, providing support and guidance to the new leadership team.

PB Design also welcomed two new members to its senior leadership team. Scott Commons, who has been with the company since 2007, has been appointed as operations manager. Commons brings extensive experience in driving continuous improvement and operational efficiency, having previously served as the company’s QHSE manager & continuous improvement champion.

Sandy Mace joined the senior leadership team as technical manager. With a strong background in technical project management and a keen eye for innovation, Mace will play a crucial role in shaping PB Design’s technical strategy and driving the business forward.

“With these new additions joining Neil Howlett (sales and marketing) and Zach Campbell (finance), we have a senior leadership team that brings a wealth of knowledge and experience to our delivery of innovation and continued success,” said Edsall. “Their collective expertise enables us to capitalise on emerging opportunities and deliver on our business growth strategy.”

Image credit: PB Design